Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Ironman1518

About

Username
Ironman1518
Joined
Visits
373
Last Active
Roles
REGISTERED

Comments

  • Has anyone used the wedge with the "Seat Foam"? If so, did you place the wedge on top or underneath the seat foam, please? Thank You!
  • djeoutdoors wrote: » We used industrial Velcro 2” wide. & velcroed our seat wedges to our seat, so far so good! I would appreciate a picture, please?
  • Finn59 wrote: » I DO like the rack that was altered from da Depot. He had his trike bungeed to it. I would ramps to load trike however. Lifting days are over... I never used the bungees i used some adjusting straps from Harbor freight. One each…
    in No more... Comment by Ironman1518 July 4
  • It's an individual decision. For me, YES!! But I used them for about 27 years........used the old "Toe clips and toe straps" for about 7 years before clipless. Some folks don't care for them some do. MY opinion for me only, is the heal straps TT pro…
  • When you said:"Bigger size in the rear" were you talking about going to a larger diameter wheel/tire or just a wider tire? I don't think your Rover could fit a larger wheel, not sure. From the pics it looks like there is no room in the frame for one…
  • TCEd wrote: » I find the trend towards offroad capable trikes interesting but also limiting in their capability. Yes a RAT can go off road but compared to a MTB or Fat bike they cannot compete on similar terrain. Three point ground contact, the in…
  • To each their own. Riding ANYTHING requires NO broken bones.........just ride. I did forget to add.....at the time of hip replacement number 5 {the titanium piece in my femur broke}, and the doc couldn't get the broken piece out of my femur, so he …
  • Florida_bound wrote: » Ironman, please list your broken bones for all of us. 1 broken wrist, 4 broken ankles, 5 hip replacements, one knee replacement, one Laminectomy. 1 dislocated shoulder, 1 separated shoulder; 2 concussions. 1 torn menisc…
  • To Florida bound and to Finn59: I raced bicycles{some road racing, Tris,and mtn bike raced from '95 to 2009} from'82 to 2009. The dirt is what I am used to, the tougher the better. I was a pretty good hill climber both asphalt and dirt. I do ride so…
  • I take my RAT out on the dirt roads out in the desert where i used to ride my motorcycles and mtn bikes and the no suspension of my RAT bounces me around a lot. The roads are not real roads at all but more like rutted 2 lane paths, LOL. So am lookin…
  • IdahoTrailLizard wrote: » FWIW, cables for locking are the worst for deterrence. A pair of wire cutters can cut through faster than you think, and more cable's weaker points are where they are looped over, often defeated by a crowbar. U locks are …
  • I know of a RAT that might be for sale in a few months time............
  • This what I bought, https://www.homedepot.com/p/CURT-500-lbs-Capacity-Bolt-Together-Aluminum-Cargo-Carrier-with-2-in-Folding-Shank-18100/205631477 {it's on sale for $83 heck of a deal I spent $100}. And modified it as in the picture works GREAT!! …
  • Never used thread locker on the cable hold down bolt. You can if you wish I just tightened it down. NEVER had one come loose. Just me.
  • Ok Chonk where is the new "Stuff" for the RATS? {I think he changed his mind and decided to go with the "Tarantula".}.....just saying...
  • Wish you lived near, I'd have you bring it by to look at it and your rear wheel. "maybe" it could be straightened and you would only have to re-do the alignment.
  • I think it's gonna be a t-shirt or maybe a seat cover with something like this, but not the "Tarantula" but with a RAT on it.....{My 7 year old grand daughter named my RAT the"Tarantula"; so I took the seat cover and had it embroidered. I like the n…
  • Which crankset do you have on your trike? UNLESS I am wrong that Park should work, if you have a square ended BB axle. I've used min on Many 3 piece cranksets, even "octalink". Best wishes.
  • AZThanks wrote: » Hi AZTHANKS; I am interested in making a similar mount to what you made with the piece of PVC attached to the front of your trike. Please post more pics and how you made it? Thank you! …
  • JamesR wrote: » chainwrap is one of the limiters when regearing. rat chainwrap (36-22)+(40-11)=43 links mtb chainwrap (44-22)+(40-11)=51 links above based on the assumption you wish to keep present low gearing while increasing gearing range…
  • Thank you I did look at them; but $38 for a mount is way more than I want to spend.
  • How did you make the head light mount, please? I like that design!! What materials did you use; looks like a PVC piece to mount the light, but how'd you mount it to the front of the trike? Thank you!
  • TrikeBirder wrote: » A word about RhinoDillos tire liner. I'm no expert, in fact, I have zero experience with any sort of tire liners. I did however, speak at length with Leo, a 75 year-old part time employee at Ajo Bikes who claims to have 60 yea…
  • squirrelpie0 wrote: » Did you manage to get any picts of this procedure on install of liners. My text comprehension is weaker than my visual comp. Thanks in advance. Also back into the cold of Rainy River, missing those Florida zephyrs Here …
  • Finn59 wrote: » Ironman-how close was your unit to the sensor on your wheel?? I have both on the left side, on the left front wheel, I am guessing maybe 18 inches max. It works great! The unit is "OLDER" from Cateye I had it on my Orbea Oiz ca…
  • Have a many years old Cateye CC-MC100W wireless computer that was on my Orbea Oiz mtn bike. Took it off when I sold the bike and mounted it on my RAT. Too bad they don't make it anymore. GREAT wireless computer, NOPE, Never zeroed out the total dist…
  • MY absolute pleasure Mike!! Shop is open anytime to anyone! Had fun late night chit chatting with you!
  • I got a set of the Jagwire Pro brake kit and two shifter kits in ORANGE!! They make my RAT look great! One way to cut and make the cable housing work correctly is to cut the housing with whatever you have, dremel wheel, dykes, whatever. You can use …
  • Very nice!!
  • Finn59 wrote: » Here’s the 2nd rack I built. All aluminum. Channels are 1”x2”. Have not loaded Rover on it yet. 5/16” U bolts. Maybe some stringers between and under the channels to beef it up... Can't wait to see the finished rack with a trik…